Tag Archives: grinder’s processing problems

What are the rewards for drill bit sharpening machines?

the drill bit grinding machines produced by purros are sold all over the world

  1. Save more than 70% of the cost of drill bits

 

  • 1). Old tools become new tools. A drill can be sharpened at a small cost. It saves you a lot of money.
  • 2). Old tools such as drill bit/milling cutter tool can be grinded and reused.
  • 3). The grinding capacity of each tool is only 0.4mm, and each tool can be grounded more than 10 times.
  • 4). It solves the problem of traditional manual grinding tool (non-standard, short life and long time).
  • 5). High grinding precision, extend tool’s life.
  • 6). It can not only grind high-efficiency drill bit, but also can grind common drill bit into high-efficiency drill bit.

 

  1. Improve machining efficiency by 3-6 times

  • 1). It takes an average of one minute to repair and grind a drill bit, with high grinding efficiency.
  • 2). Our bit grinding machine has high precision and good processing quality .
  • 3). The life of the drill grinding machine is long and the auxiliary time is small.
  • 4). This machines have fast to feed speed and high processing efficiency.
  • 5). The machines have been reduced processing procedures and improved work efficiency.

 

  1. Solve more than 80% of processing problems

  • 1). With one machine can repair and grind drill bits (milling cutter) of various diameters.
  • 2). The quality of the grinding machine is good, and the precision of the drill bit is guaranteed.
  • 3). Drill bit grinder can improve the cutting performance of the tool and improve the machining efficiency.
  • 4). The machines have small cutting load and long tool’s life.
  • 5). The drill bit grinder can reduce the breaking edge of milling cutter and improve the service life of milling cutter.
  • 6). Our grinder machine can solve the problems of hole deviation, hole expansion, hole shrinkage and burr in general hole processing.
  • 7). Using our machines will solve the problems of short drill life, low drilling efficiency and difficult chip discharge caused by deep hole machining.

 

  1. Provide perfect after – sales service

  • 1). Provide customers with the most professional and economical purchasing plan fro free of charge.
  • 2). Help customers to check the machine platform for free, and develop special grinding tool’s SOP.
  • 3). Help customers improve the processing technology and improve the processing efficiency for free of charge.
  • 4). Provide customers with professional tool’s knowledge and advanced processing technology for free of charge.